News

balloon structures of the timber

Structure is something that should be very calm. like a balloon structure The truss of the wall will be placed on top of the lumber. by attaching to joists and rails with nails which is a general home builder Or home builders in Korat รับสร้างบ้านโคราช are known to have the following details:

  • wooden floor
  • Fire barrier
  • 10d nails

shoulder support beam

  • Provide a gap of at least ½” (13) at the end of the beam.
  • Timber beams
  • The beam backing prevents direct contact between wood and pavers or concrete.
  • Beam leveling wedge
  • At least 3″ (75) shoulder spacing for wooden beams placed on cement walls.
  • Expand the cement wall or make a bulging pole in case the distance on the shoulder is insufficient.

Timber may be placed on wooden beams or steel beams which can built by company in Ratchaburi รับสร้างบ้านราชบุรี as well. But whether it is placed on any type of beam The level of the beam should be consistent with the level of the secondary beam and the characteristics of the joist that is placed across the beam as well. Since the wood has a weak point of shrinkage perpendicular to the wood splinter line, therefore, it should be designed so that the level of the central roof beam is equal to the level of the support beam. This will help stabilize the joists and rest them on several supports of the same level.

read more : kingnews33

The joist form is attached to the side of the wooden beam with special equipment.

  • Solid wood beams.
  • Write a straight line for alignment on the other side of the beam.
  • Placing the joists with the beams at the same level. It will help to save the space of the floor structure.
  • Should choose hardwood that has already dried.
  • Metal support equipmentRead More About:  imoch.org

The joist type is attached to the side of the steel beam.

  • The head of the head is placed on the upper level. for continuity in floor support
  • Fasten the nail head to the head tong. By allowing a gap of about ½” (13) head joists for the stretch-shrinkage of the joists caused by temperature changes.
  • Screw the steel ring onto the threaded steel dowel. which is connected to the lower beam wings The hole in the ring should be as large as the hole in the support. To provide space for the extension or contraction of the support.
  • Steel beamsvisit here to know more information : kingnewsweb

The joist form is attached to the side of the general wooden beam

  • The joist is fixed on both sides with nails.
  • Allow ½”(13) gap for fastening or shrinking.
  • In case the level of the back tung is equal to the level of the roof To notch the back joist and beam down to fix the steel plate fixing the joist on top. so that the level behind the joist is always the same
  • Drive 10d nails obliquely to the beam.
  • Drive three 16d nails to the support position.
  • 2″ × 4″ slats, which provide 1½” (38) shoulder width.

hung on steel beams

  • The wood is attached to the side joists.
  • At least 1½”(38) shoulder width on each side.
  • The support is secured with a steel dowel at the end of the thread which is attached to the beam wings. The hole in the ring should be as large as the hole in the support. To provide space for the extension or contraction of the support.
  • At least 4″ (100) spanning distance.
  • Three 16d nails
  • Drive a 10d nail diagonally down to the support.

sloping on a wooden beam

  • At least 4″ (100) spacing, nailed with three 16d nails.
  • The joists are perpendicular to the line of the joists to help strengthen the joists so they do not turn over.
  • Wood or steel to hold the side joists.
  • At least 1½” (38) shoulder width on each side. Here newszone360 you can find essential news

Non-loading wall – no bottom wall

Read More About:  mediaposts.net

  • wooden frame wall
  • Secondary wooden frame
  • wooden floor
  • Tong

Non-loading wall – no bottom wall

  • Double joists support the wall.
  • Insert the insert inside the slot size 2″ × 4″ every 16″ distance (405).
  • Tong Soi supports the wall.
  • 2″ thickness crossbar support
  • The twin joists are spaced apart to provide a space for pipe work.
  • 2″ × 6″ crossbar support, every 16″ spacing (405).
  • Long wooden support, size 2″ × 2

load-bearing wall

  • wooden frame wall
  • Secondary wooden frame
  • wooden floor
  • Tong
  • Fire barrier
  • A pair of wooden supports fixed to the lower wall.
  • Balloon-style wooden bar.
  • A pair of wooden sticks
  • Double joist under the wall.
  • The insert is inserted inside the slot size 2″ × 4 at every 16″ distance (405).
  • A pair of wooden supports fixed to the lower wall.click here for  more : world247zone

Load-bearing walls – no upper walls

  • Tong
  • Fire barrier
  • Double stick
  • The lower wall frame

Non-load bearing walls – no upper walls

  • 2″ × 4″ crossbar support, placed every 16″ (405) spacing.
  • Wood for fixing the ceiling size 1″ × 6″
  • A pair of wooden sticks stretched over the lower wall.
  • The lower wall frame

Mounting area perpendicular to Huadong

  • The direction of the stump.
  • Double beam alley
  • Soi beam
  • Tong pair
  • Steel bracket joist
  • Crossbar support on the support. Or can be placed to hold the ceiling outside the secondary wood.
  • Alley, if the protruding distance exceeds 24″ (610), consult an engineer.
  • The head of the beam is fixed with 20d nails.And this worldkingnews portal also supply worldwide news. Discover all sorts of headline news on worldkingtop and this is the another usazonenews where you can get all news. By the way, gamesupdate24 always provide all sorts of games and sports news.

The floor extends parallel to the joist.

  • The direction of the stump.
  • Tong pair
  • The head of the beam is fixed with 20d nails.
  • Tong pair
  • If the protrusion exceeds 24″ (610), consult an engineer.
  • End cover

The opening is perpendicular to the dong.

  • Walls or beams supporting joists.
  • Double joist, fixed with 16d nails every 16″ (405) distance.
  • Double-headed wooden cover
  • If the joist is longer than 10′ (3,050), it should be designed to have a support bar.
  • Steel fixing the head to support the head off the head of the joist.
  • The joist is attached to the joist with a head fixing device.
  • Columns or walls supported by joists or headboards.

The opening is parallel to the dong.

  • If the joist and headboard are longer than 4′ (1,220), add 1 more piece.
  • Steel fixing device straight head.

Related Articles

Leave a Reply

Back to top button