The best way to stand out from the crowd is to express yourself via your style.

Once you’ve printed and downloaded the template, you may start using it right away. An 8-by-10-inch lighting box has been designed for this purpose, but it may be scaled up or down to meet your specific requirements. demands. You’ve got a chance to create something that’s really yours. In order to keep the weight and thickness down, we recommend that you use 170 grammes of white card for your project. Allow a 1 cm margin for all your layers when placing the initial layer on top of your card stock. As a consequence, applying glue to your assembled components will be a snap. If you want to get free papercut light box templates, please visit our website.

The layers may be peeled back.

An X-Acto knife is required for the initial layer. An X-acto knife may be used to cut materials with high precision. In order for the second layer to be drawn, it must be placed on top of the first layer. Afterwards, go to the next layer. Continue cutting off the layers until you’ve removed all of them.

If required, the layers may be re-assembled.

The use of foam spacers is crucial in order to prevent the layers from becoming muddled. As a result of this approach, a 3D effect is produced. Remove the foam spacers and store them in a safe place. Each one is separated by a one-centimeter space. This project calls for 24 25-centimeter spacers as well as 24 18-centimeter spacers. Each layer should include at least four spacers.

Using a glue stick, attach the layers together. There should be spacers in between each layer, and then glue should be used to join them together. To begin with, check to see that all of the layers are aligned correctly before you begin editing them. Still additional galvanization is required. You don’t need to use spacers to separate these three layers to create a reflection effect. To assemble, just use tape and glue. Water is first and foremost in the order of importance, followed by the horse.

Build a box using wood.

Begin constructing the wooden box right now. Even if you aren’t skilled in woodworking, pre-made boxes are available for purchase. For lights, frames, and glass panels, add 2 cm to the thickness of the layers you’ve previously made. My carrying case has an 8-centimeter depth. If it’s too tight on you, you may always add little more room.

Starting with a foundation, build a structure from the inside out.

Use the accompanying 1 1 cm wood stripe to hold the glass in place. Eight equal pieces, each about 25 centimetres in length, should be cut from the sheet of paper. Remove the parts from the box as soon as the glue has cured.

Use a Brush to Create a Lightbox

Paint the light box. Exterior paint colours are unlimited, however the back should be painted white and not obscured by a card panel.